Link Chair

Backrest

The mesh backrest consists of an ergonomically shaped perimeter frame made of injection-moulded PA6. Technical elastic meshing is fitted onto this frame. Its tautness means that the backrest supports and adapts properly to the anatomy of the user's back. It has built-in, height-adjustable lumbar support made of injection-moulded pol yamide which can be adjusted in height by 70 mm and has13 locking positions. The backrest can be finished in Black (NE) or White (BA). 

The headrest is a set of injection-moulded polyamide parts onto which a flexible mesh is fitted. It is height-adjustable by 75 mm with 14 different positions and the tilt can be set in 5 locking positions with a range of 35°. Black (NE) finish. The headrest can come fitted with an optional T-shaped clothes hanger made of injected polyamide. Black (NE) finish. Same mesh as the backrest.

Seat

An ergonomically-shaped, fibre-reinforced, injection-moulded polypropylene support onto which flexible foam rubber with a thickness of 55 mm and approximate density of 40 kg/m3 is attached and then covered with fabric.

Depending on the mechanism, the seat can be adjusted in depth by means of a sliding adjustment system. 

Chair height adjustable by air-oil cylinder with a stroke of 130mm. Black finish.

Mechanism

S02 Self-weighing Synchro Mechanism which automatically adjusts the pressure of the backrest to the weight of the user. 

Angular synchronisation of the movement of the backrest and seat: 22° backrest / 11° seat. Black (NE) finish.

- Permanent contact with free mechanism. 4 locking positions. Non-return system. 

S03 Self-weighing Synchro Mechanism with sliding seat which automatically adjusts the pressure of the backrest to the weight of the user. 

Angular synchronisation of the movement of the backrest and seat: 22° backrest / 11° seat. Black (NE) finish.

- Permanent contact with free mechanism. 4 locking positions with non-return sys tem. Seat depth adjustable by 50 mm with 5 locking positions. 

L80 Synchro Mechanism with sliding seat: the pressure of the backrest is adjusted with a knob on the side with 3 positions. Angular synchronisation of the movement of the backrest and seat: 22° backrest / 15° seat. Black (NE) finish.

- Permanent contact with free mechanism and 4 locking positions. Non-return sys tem. Seat depth adjustable by 70 mm with 6 locking positions

Base

Fibre-reinforced base: Ø680 mm. Black finish. 

Aluminium base: Ø700 mm. Finish: Polished or coated with polyester epoxy. 

Ø60 castors: Hard, soft or conductive. Black finish. 

Stool base: Same base and castor options, with a lift column adjustable by 188mm onto which the footrest, consisting of a circular chrome-plated steel rod measuring Ø450mm and supported by 4 aluminium arms coated black, is fitted 

Armrests

1D/2D: Glass-fibre reinforced, injection-moulded polyamide support and polyamide armrest. Finish: 1D - black/white (hard), 2D - black (soft touch). 

3D: Glass-fibre reinforced, injection-moulded polyamide support and TPU armrest. Black finish (soft touch). 

4D: Glass-fibre reinforced, injection-moulded polyamide support and polyurethane armrest. Black finish (soft touch)