ZAS - Visitor Chair

Seat

Ergonomically designed seat made of polypropylene injection, 7.5 mm general thickness, fixed to the structure by four fixing points. 

In the upholstered version, a flexible rubber foam of medium density of 40 kg/m3 and 15 mm thick is glued, onto which the fabric is fitted. 

Back

The ergonomically designed backrest made of polypropylene injection, and 7 mm thickness in general, is embedded in the aluminum backrest support. 

In the upholstered version, it has a "clipped" cushion made of injected polypropylene, on which a flexible foam rubber of medium density of 30 kg/m3 and 7 mm thick is glued, onto which the fabric is placed. 

Structure

4 Legs - It is a welded whole made of ø22x1.5mm, ø18x2mm steel tube and 25x5mm steel plate, finished at the top by a fully integrated piece of injected aluminum, which acts as a back support and armrest. 

The structure is finished off to the ground with cleats or wheels. 

Sled base - It is a welded whole made of ø22x2.5 mm steel tube (internally rein forced with a ø16x2 mm tube core) and 25x5 mm steel plate, finished at the top by a fully integrated injected aluminum piece, which performs the functions back support and armrests. 

The structure is finished to the ground with or without polyamide cleats. 

Swivel - Welded whole with CO2 welding, finished at the top by a fully integra ted piece of injected aluminum, which performs the functions of backrest and armrest support. In the lower part it has a swivel support made of 2.5 mm shaped sheet metal. 

Height-adjustable gas spring, with 5-arm swivel base in polyamide, painted or polished die-cast aluminium, finished on wheels for hard or soft floors.

Base

Swivel base 

Polyamide with fiber: Ø 680 mm, black finish. Aluminum: Ø 700 mm, polished or painted epoxy polyester. Soft and hard floor castors Ø 50 Ø 60, black color. Option conductive castor Ø 60